What AMR Battery Covers
These high-compute tasks demand far higher peak power from batteries than traditional AGV. AMR CPU/GPU continuous power 30–80W plus drive motor peaks — batteries need 2C-3C peak discharge. AMRs often operate in human-robot mixed environments (warehouses, hospitals, malls), requiring higher safety. PLB AMR battery: 2C sustained/3C peak, six-fold safety protection.
Professional Battery Solutions
SLAM High Compute + Motor Peak — Can Battery Handle It?
AMR CPU/GPU runs SLAM continuously (30–80W) while drive motors handle sudden acceleration, climbing, emergency stops — peak power 2-3× rated. Lead-acid voltage drops dramatically under high-rate discharge — CPU power unstable causing SLAM lag, positioning drift, avoidance delay. AMR "getting lost" or "hitting obstacles" often traces back to unstable battery power.
Stable voltage throughout; no SLAM lag, no positioning drift. 2C sustained/3C peak discharge — motor acceleration gets 3× current, voltage drop <2V. CPU stable, SLAM unaffected. Tested: under full-load climbing, rapid acceleration — positioning maintained within ±10mm.
| Conventional | PLB AMR | |
|---|---|---|
| Peak load | Voltage unstable under SLAM and motor peaks | Stable |
| Voltage sag | Noticeable | Under 2V |
| Positioning accuracy | ±20 mm | ±10 mm |
| Path reliability | Occasional errors | Consistent |
Human-Robot Mixed Operation — How to Ensure Battery Safety Level?
The pain is specific: Human-Robot Mixed Operation — How to Ensure Battery Safety Level? In daily operation, lead-acid or manually managed packs lose capacity between scheduled checks, maintenance teams cannot inspect every unit, and the failure surfaces only when the load is already at risk.
Six-fold safety protection + LiFePO₄ chemistry (no fire, no explosion). PLB's LiFePO₄ pack and BMS monitor cell voltage, temperature and SOC continuously, alert before a weak cell becomes a failure, and are sized to the application's load profile.
| Conventional / manual | PLB LiFePO₄ | |
|---|---|---|
| Monitoring | Periodic checks | Continuous BMS |
| Fault warning | At failure | Threshold alerts |
| Maintenance | Scheduled visits | Exception-based |
| Service life | 2–3 years | 6,000+ cycles |
AMR System Integrators — What Do They Fear Most from Battery Suppliers?
AMR integrators need one-stop battery solutions from cell selection, BMS matching, housing customization to Pack delivery. Fear: cell maker doesn't understand AMR needs, BMS maker can't match dispatch protocols, housing maker gets dimensions wrong — three suppliers point fingers, project delayed with penalties. Industry average integration time: 3–6 months.
One-stop supply; integration from 3–6 months to 1–2 weeks. Full chain self-supply from cells to BMS to housing to Pack. BMS team understands AMR dispatch — CAN/RS485 standard protocol, 1–2 week integration. OEM custom 4–8 weeks delivery. One supplier, one contract, one quality owner.
| Multiple suppliers | PLB one-stop | |
|---|---|---|
| Suppliers needed | Several | One, from cell to pack |
| Joint debugging | Weeks to months | 1–2 weeks |
| Protocols | Proprietary | CAN / RS485 standard |
| Quality responsibility | Split | Single owner |
Solution Advantages
High Rate
2C sustained / 3C peak
High-rate cells handle SLAM computing and motor peaks together with voltage sag under 2V, holding positioning accuracy to ±10 mm.
Voltage sag under 2V · Positioning ±10 mmSix-Fold Safety
CE + UL certified
Six-fold protection with non-flammable LiFePO₄ removes risk in human-robot mixed operations and supports a 10–15% insurance premium reduction.
LiFePO₄ does not ignite · 10–15% lower premiumsOne-Stop
Cell + BMS + Pack, 4–8 weeks
One supplier covers the whole power chain with standard CAN and RS485 protocols, cutting joint debugging to one or two weeks.
CAN / RS485 standard · Single quality ownerFlexible Custom
From 10 units, tiered pricing
OEM orders start at ten units with tiered pricing and defined production scheduling, supporting programs from prototype to volume.
From prototype to volume · Defined schedulingFrom Selection to After-Sales — PLB Stays With You
Four commitments that apply to every page in this category, from the first technical question to long-term support.
Technical Selection Support
Engineer recommends within 24 hours
Tell us the robot duty cycle, charge window and bay dimensions — our engineers size the pack and recommend the model within 24 hours.
Dedicated technical team · 24-hour response
OEM / ODM Customization
From cell to cabinet, fully customizable
From cells, BMS, housing and terminals to the nameplate, everything can be customized.
4–8 week customization · Tooling development supported
Global Shipping
Export to 100+ countries
Export-compliant packaging with UN 38.3 air transport certification and worldwide delivery.
UN 38.3 certified · MSDS available · Export compliant
Warranty & Support
Standard warranty, lifetime support
Standard products carry a full warranty, backed by lifetime technical support.
Warranty terms on request · Lifetime technical supportWhy Choose PLB?
Years of Manufacturing
Founded in Dongguan, China in 2014
Countries Served
Export-compliant packaging and worldwide delivery
Voltage Platforms
From 25.6V to 512V, built on the same cell platform
After-Sales Rate
Monitored by the internal quality traceability system
Full Range & Model Selection
Complete product range and model selection — lightweight packs for goods-to-person robots, high-current packs for forklift AGVs and low-temperature versions for freezers.
| Model | Voltage | Capacity | Continuous current | Typical robot | Applications |
|---|---|---|---|---|---|
| 25.6V 40Ah | 25.6V | 40Ah | 60A | Goods-to-person AGV | E-commerce picking · sorting |
| 25.6V 60Ah | 25.6V | 60Ah | 80A | AMR with manipulator | Assembly feeding · hospital logistics |
| 51.2V 100Ah | 51.2V | 100Ah | 150A | Forklift AGV | Pallet handling · 1–1.5t lift |
| 80V 200Ah | 80V | 200Ah | 250A | Heavy forklift AGV | Port · steel coil · 2t+ lift |
| D-25.6V 40Ah | 25.6V | 40Ah | 60A | Freezer AGV | Cold chain · −20 °C operation |
By robot type: Goods-to-person AGV → 25.6V 40Ah.
By environment: Ambient warehouse → standard series.
Not sure? Send us the duty cycle and charge window — our engineers will size the pack directly.
Frequently Asked Questions
The questions AGV and AMR integrators ask most about LiFePO₄ robot packs in the AMR Mobile Robots scenario — 2–3C (peak discharge), and what it takes to qualify.
Will a PLB pack replace the lead-acid unit in the AMR Mobile Robots scenario without rework?
Packs are built to the robot bay envelope, system voltage and connector, with CAN bus and RS485 as standard and an outline matched to common robot bays. Typical models for AMR Mobile Robots builds are AMR-24V/50–150Ah.
What runtime and output can we expect over a shift in the AMR Mobile Robots scenario?
LiFePO₄ accepts partial charging without a memory effect, so the robot tops up at every idle window instead of waiting for a full overnight cycle. Key figure: 2–3C (peak discharge).
What temperature and ingress rating is specified for the AMR Mobile Robots scenario?
Charging is blocked below freezing to prevent lithium plating, and sealed housings keep dust and washdown water out of the pack.
Can the pack report SOC and alarms to monitoring already used in the AMR Mobile Robots scenario?
CAN bus and RS485 report SOC, voltage, current and temperature to the fleet manager, with SOC accuracy high enough for charge scheduling.
Which models cover the AMR Mobile Robots scenario, and how is delivery handled?
Typical models are AMR-24V/50–150Ah. Custom packs take 4–8 weeks including tooling, and lead time for standard models is confirmed on the quotation. Tell us the robot duty cycle, charge window and bay dimensions — our engineers size the pack and recommend the model within 24 hours.
Need a Selection Recommendation?
Tell us the load, backup time and installation space — our engineers will recommend the matching battery within 24 hours.
NDA available upon request · Typical response within 12 hours